Failed to create netlist when simulating extracted view

Hello,

In simulating extracted view, I get the following error:

The question is where do I set simChecTermMismatchAction to ignore or warning?

ERROR (OSSHNL-912): Netlisting failed because terminal 'vbias' specified in placed master 'whole_chip/nmos_two/symbol'
does not exist in switch master 'whole_chip/nmos_two/calibre'. To continue netlisting, either set
the 'simCheckTermMismatchAction' to 'ignore', or set the
'simCheckTermMismatchAction' to 'warning' and 'nlAction' to 'ignore' for the
missing terminal.

ERROR (OSSHNL-912): Netlisting failed because terminal 'vdd' specified in placed master 'whole_chip/nmos_two/symbol'
does not exist in switch master 'whole_chip/nmos_two/calibre'. To continue netlisting, either set
the 'simCheckTermMismatchAction' to 'ignore', or set the
'simCheckTermMismatchAction' to 'warning' and 'nlAction' to 'ignore' for the
missing terminal.

ERROR (OSSHNL-912): Netlisting failed because terminal 'vneg' specified in placed master 'whole_chip/nmos_two/symbol'
does not exist in switch master 'whole_chip/nmos_two/calibre'. To continue netlisting, either set
the 'simCheckTermMismatchAction' to 'ignore', or set the
'simCheckTermMismatchAction' to 'warning' and 'nlAction' to 'ignore' for the
missing terminal.

ERROR (OSSHNL-912): Netlisting failed because terminal 'vo_neg' specified in placed master 'whole_chip/nmos_two/symbol'
does not exist in switch master 'whole_chip/nmos_two/calibre'. To continue netlisting, either set
the 'simCheckTermMismatchAction' to 'ignore', or set the
'simCheckTermMismatchAction' to 'warning' and 'nlAction' to 'ignore' for the
missing terminal.

ERROR (OSSHNL-912): Netlisting failed because terminal 'vpos' specified in placed master 'whole_chip/nmos_two/symbol'
does not exist in switch master 'whole_chip/nmos_two/calibre'. To continue netlisting, either set
the 'simCheckTermMismatchAction' to 'ignore', or set the
'simCheckTermMismatchAction' to 'warning' and 'nlAction' to 'ignore' for the
missing terminal.

ERROR (OSSHNL-912): Netlisting failed because terminal 'vss' specified in placed master 'whole_chip/nmos_two/symbol'
does not exist in switch master 'whole_chip/nmos_two/calibre'. To continue netlisting, either set
the 'simCheckTermMismatchAction' to 'ignore', or set the
'simCheckTermMismatchAction' to 'warning' and 'nlAction' to 'ignore' for the
missing terminal.

End netlisting Jun 25 01:06:32 2020
ERROR (OSSHNL-514): Netlist generation failed because of the errors reported above. The netlist might not have been generated at all, or the generated netlist could be corrupt. Fix the reported errors and regenerate the netlist.
...unsuccessful.

I read the previous question regarding my issue as shown below but couldn't get a clue. 

https://community.cadence.com/cadence_technology_forums/f/custom-ic-design/35637/error-during-creating-the-netlist-from-layout-using-45nm-technolgy

Thanks in advance for your help.