Creating a Calibre View from an Extracted Netlist

Hi All,

I have an extracted netlist with parasitics given by the IP provider for all standard cells. However this netlist (shown in below link, only for one cell) looks more like a .cdl than a pex.netlist. 

https://pastebin.com/Ar9iKYSK

How can I add a "Calibre View" to a cell using this netlist ? I know this can be imported as a Spice netlist to the OA library (I use IC 6.1.5), and I assume that is not accurate as parasitic resistors and capacitors in the extracted netlist will not be mapped (Calview.celmap in this case missing) to right models in PDK like what we do in PEX process.

Thanks and Regards

Anuradha