I'm simulating a receiver across corners. Each corner has a different amount of delay. When I plot a node "across corners" and then generate the resulting eye diagram, all these different delays from the different corners result in the composite eye being much narrower than is the case if the corner delays could be nulled. What would be the simplest/quickest way I could shift the different corners to into time alignment? If that can be done, then I can use eyeAppeture to generated stats on the eye at all the nodes along the receive path. This doesn't have to be automated; it would be fine if I could manually add a shift to each corner. But once this is done, I would like to be able to save this result to be used by eyeAppeture on different nodes in Assembler. Thanks in advance.
↧